Sintering
The compacted / green products obtained from the presses
are fragile and powder compacted under mechanical loads needs
to be
bonded together with metallurgical bond.
The components are passed through a Continuous,
mesh belt type, electrically heated, controlled atmosphere
sintering furnace.
The components are placed on the charging
end of the sintering furnace. The material is sintered at temperature
ranging from 800 C to 1120 C for a time span of 25 min to 45 min depending
upon the alloy of the component.
The entire atmosphere inside the furnace
is controlled with no presence of oxygen. The
material heats and retains at the desired temperature
for the time required before it cools down to room temperature,
all under specifically controlled atmosphere, time and temperature.
The total sintering process may take
180 min to 240 min
in the furnace from charging to discharge end.
This entire process is controlled
using various controls on Sintering furnace
backed with Controlled Atmosphere generator,
de-humidizers and flow control rotometers.
The product
thus obtained from the Sintering Furnace has adequate strength and porosity to carry out further operation.
|
Contact Us
Vasundhra Sintered Private Limited
Address : S-90, Badli Industrial Estate Delhi - 110042 ( INDIA )
Website: www.sinteredproduct.in Email : vasundra@vsnl.com
|
Director Technical : +91-9811118588
Director Marketing : +91-9313373421
Director Finance : +91-9899022444 |
|
